Running version 7.0.2
Plotting a set using the "omit endpoints" feature cuts off the last person selected in the group - they don't make the transition...
Problems with "Omit end points "
Moderator:PywareTechSupport
Re: Problems with "Omit end points "
You will need to add an additional person to the form in the positions textbox to have the performers transition properly.
For example if you have a form of 12 performers and you choose omit overlaps then you overlap 1 performer only 11 performers will be moved as 1 performer was omited as it was overlapping. You will need to change the number of performers to 13 and then the omitted person will not be assigned and all 12 performers will move properly.
For example if you have a form of 12 performers and you choose omit overlaps then you overlap 1 performer only 11 performers will be moved as 1 performer was omited as it was overlapping. You will need to change the number of performers to 13 and then the omitted person will not be assigned and all 12 performers will move properly.
Thank you
Dustin Merrell
Pyware Technical Support
940-240-8536
Dustin Merrell
Pyware Technical Support
940-240-8536
Re: Problems with "Omit end points "
Of course. Knew that, forgot it