Pyware doesn't seem to be saving pace information (regular time/half-time/double-time). It will remain accurate when the file is loaded, but when I save and re-open it doesn't retain.
I am running version 7.0.3 on a MacBookPro on 10.7.4.
Saving pace information
Moderator:PywareTechSupport
Brian P. Timmons
Director of Bands
Bergenfield High School
Bergenfield, New Jersey
Director of Bands
Bergenfield High School
Bergenfield, New Jersey
Re: Saving pace information
How are you entering the Pace information through the Visuals tool or through the pace tool?
Thank you
Dustin Merrell
Pyware Technical Support
940-240-8536
Dustin Merrell
Pyware Technical Support
940-240-8536
Re: Saving pace information
I have been using the Pace setting menu from the Tools menu as well as the Visual Editor for the Real View Perspective Window.
Are the two settings linked, because they don't seem to be?
Thanks!
Are the two settings linked, because they don't seem to be?
Thanks!
Brian P. Timmons
Director of Bands
Bergenfield High School
Bergenfield, New Jersey
Director of Bands
Bergenfield High School
Bergenfield, New Jersey
Re: Saving pace information
If you have the Real View open you will need to enter pace through the Visuals Tool. If the Real View is disabled you would need to enter the pace from the Pace tool.
The opposing tools should be disabled to prevent issues, I will take a look at that.
The opposing tools should be disabled to prevent issues, I will take a look at that.
Thank you
Dustin Merrell
Pyware Technical Support
940-240-8536
Dustin Merrell
Pyware Technical Support
940-240-8536