Pygraphics, Inc. - Dynamic Drill Design

Software Updates

Last Updated 5/26/2010

Updates

3D Basic, Interactive, Professional 5.0.8 Build 05
3D Basic, Interactive, Professional 4.2.12 Build 02
3D Interactive Version 2 and Version 3 Security Update
Audio Convertors

3D Basic, Interactive, Professional v 5.0.8 Build 05

In order for this update to install, you must hav a fully operating installation of 3D on this computer. The updater only updates from 3D Installations (any version 1 thru 5). To upgrade from earlier Pyware Drill Design products, contact Pygraphics at 800-222-7536 or a Pyware dealer.

Updating from 3D Version 5 is FREE.

Updating from 3D version 1, 2, 3, 4 - a purchase is required and will require a Version 5 Serial Number during installation. If you have already purchased this update, you should have been given the Version 5 Serial Number. If you have not yet purchased this update, you can do so during the update with a Credit Card.

How to update:

Click on the appropriate operating system platform.
Update MAC OS X (10.5, 10.6)"3DJIA.5.0.8.Mac.Update.build05.zip" (18 MB)
Update Windows XP, Vista, & 7"3DJIA.5.0.8.Windows.Update.build05.exe" (44 MB)
Save it to a location on your hard disk. Remember the location where you saved it.
Locate the downloaded file corresponding to the correct download on your hard drive and double-click on it to start the update.
Follow the screen prompts.

Hardware Requirements:
1.6Ghz or greater (Dual Core Processor Recommended)
1 GB of RAM (Suggested 2GB Ram)
Mac OS X (10.5 Leopard ,10.6 Snow Leopard, Java 1.6) Operating System or Windows XP, Vista,7

Click here to download the Version 5.0 manual.

New in 5.0.1 - 5.0.8

Security Update for connecting to Online File System
Corrected issue with online connectivity with some systems.
Improved on look and feel.
Improved on issue of the software lagging.
Corrected issue with the Performer ID panel contour option not operating properly.
Corrected issue in the shortcut editor with the Page Up, Page Down, Home, and End.
Added option to remove animation of Tool panels in the Display Tab of Application Options.
Corrected multiple tool panels that did not display all options.
Corrected Check box functions for the Drillbook printer (cover sheet and merge drills).
Corrected issue with not being able to select after using the Performer ID panel to adjust labeling.
Need to allow the CID to be seen in the Demo so that we can get the ID to activate the demo with the activation code file.
Drill Rewrite on 10.4 if you choose to stop at each page then you do not get all of the options at each page you only get the button for the equalize.
Drill Rewriter - When in this tool then clicking off a window appears :
Cancel will undo the changes currently made to the Drill Rewrite. Okay to cancel?" if you choose no, the tool panel still closes and you lose any changes made.
The Text in the Tools menu is not working so this makes the shortcut not work.
Count Track focuses on keeping both anchors in view, so you cannot scroll the yellow anchor to zero from the end of a file
Production Tab showing in Basic Edition
Shortcut keys not being read from the file properly, comma, hyphen (minus), period, slash, equals, semi-colon.
If I have several page tabs (exceeding past the screen 100+ counts) and remove a tab (alt Click) the count track rolls back to the beginning as opposed to holding.
Corrected file security issue.
Corrected issue with the 3D fonts not selecting properly on Mac.
Removed unnecessary calls to bring the production sheet up to be viewed.
Production sheet will now properly remain closed if you have the option deselected in the application options menu.
Changed the cursor to be a crosshair while editing in tools.
Corrected issue with program not launching on some 10.4 machines.
Corrected saving as Version 4 file type.
Corrected issue with the cast list locking the software when editing custom figurines.
Backspace(delete) has been added to the shortcut button options.
Corrected when ctrl clicking to select 1 performer the editing tools were not available.
Removed the cast sheet popup after animation is finished.
Added the new Stride Zone - shows visually the maximum stride zone for the selected performers over the range of counts being edited. This area is adjusted in the Document Options with the maximum stride notification.
Production Sheet rollover area size has been reduced and now has a button to indicate the area.
Corrected issue when running a Dual monitor configuration that you could not move the Perspective View, Console, or Production Sheet on to the secondary monitor to the left.
Mac shortcuts are now working properly.
Pace Tool animates properly when you select a range.
Continue File from specific count now creates the file properly.

3D Basic, Interactive, Professional v 4.2.12 Build 02

In order for this update to install, you must hav a fully operating installation of 3D on this computer. The updater only updates from 3D Installations (any version 1 thru 4). To upgrade from earlier Pyware Drill Design products, contact Pygraphics at 800-222-7536 or a Pyware dealer.

Updating from 3D Version 4 is FREE.

Updating from 3D version 1, 2, 3 - a purchase is required and will require a Version 4 Serial Number during installation. If you have already purchased this update, you should have been given the Version 4 Serial Number. If you have not yet purchased this update, you can do so during the update with a Credit Card.

How to update:

Click on the appropriate operating system platform.
Update MAC OS X (10.4, 10.5)"3DJIA.4.2.12.Mac.Update.build02.zip" (24 MB)
Update Windows 2000, XP, Vista"3DJIA.4.2.12.Windows.Update.build02.exe" (60 MB)
Save it to a location on your hard disk. Remember the location where you saved it.
Locate the downloaded file corresponding to the correct download on your hard drive and double-click on it to start the update.
Follow the screen prompts.

Hardware Requirements:
1Ghz or greater (Dual Core Processor Recommended)
512 MB of RAM (Suggested 1GB Ram)
Mac OS X (10.4 Tiger, 10.5 Leopard, Java 1.5) Operating System or Windows 2000, XP, Vista

Click here to download the Version 4.2 manual.

New Features:

Version 4.2.12

Security Update for connecting to Online File System
Enhanced the internal printing software to allow for more efficient printing.

Version 4.2 - 4.2.11

Added Scrolling funtionality for the Leader Board Manager for large performances.
Corrected Screen layout issues generated by Mac Java update 10.5 Release 2 and 10.4 Release 7.
Corrected knife/glue palette on Windows so that you can access the Regroup like secondary button.
added functionality to removed locked in positions after doing a drill rewrite to allow new drill to be transferred forward after a drill rewrite in the middle of designing a show.
allow you to see online files in your account older that 180 days.
allow 3dz and 3dj files to be properly seen on the Leader Board Manager, previously only showing Productions properly.
Traditional Tool can now do drop offs, half distance steps, also can accomodate 1 step step offs for 6 to 5 marching.
Enhances performance on Windows Vista where tool usage was sluggish
Correction on mac with the Drill book printer not printing the first performers pathway properly.
Changed the readout on the coordinates for high school hashes from (high schl) to (HS).
We have removed the drag from bin method of adding page tabs you now just simply click on the count you want to add the page tab, you may still drag page tabs that are on the count track.
Allowed for hundredth decimal point accuracy for average interval in formation in the console for morph tool.
Updated the verison of Java Running Environment for Windows and Mac to increase efficiency
Adjusted screens on Mac to help with improperly displaying screen items.
Deauthorize this computer function has been added so that you may easily remove your current computer from your account so that you may install it on to a new machine.
Facing functionality both in design and perspective.
Added Drill book Printer Plug-in functionality
Added a full screen perspective view.
Added the use of Figurines to the perspective view.
Added option to remove page tab using alt click.
Added new figurine editor to edit figurines to match a custom uniform color.
Added ability to assign figurines to specific players in the Cast list editor.
Added Helper Editor to turn on or off all helper boxes.
Added a shift perspective view grid option.
Performer's and Props heights used in the perspective view are now in a more realistic proportion.
Impemented full Vista installation compatiblity.
Corrected an issue reported with the Counter March Tool not working properly
Corrected issue with mirrored rotate

Security Update for 3D Interactive Version 2 and Version 3

This security update is for version 2 and version 3. This update requires 3D version 2.1.0 or version 3.1.1. If you do not have this installed please request a download link from pywaretechsupport@pyware.com. Include your serial number in the email subject.

Features:

This update allows for access to the new Online File Manager system.

How to Update:

Click on the appropriate operating system platform.
Mac OS X 10.4, 10.5 "3DJIA.V2.V3.Mac.SecurityUpdate.zip" (4.91 MB)
Windows 98, 2000, NT, ME, XP "3DJIA.V2.V3.Win.SecurityUpdate.exe" (36 MB)
Save it to a location on your hard disk. Remember the location where you saved it.
Locate the downloaded file corresponding to the correct download on your hard drive and double-click on it to start the update.
Follow the screen prompts.