Visuals

The Visuals inspector will allow for adjustments to the performer body visuals at a count or over a range of counts.

Upper Body: Change the upper body pose to the desired position by choosing the option in the pull down menu. The pose is then automatically applied to the selected performers.
Take ___ counts to move: Enter the number of counts you want to take to get to the selected pose. Then select at the desired count you want the selected pose to take place.
Clear: This will clear the currently selected upper body pose.
M: This will set the currently selected count information to the default duration.

Lower Body: Change the lower body pose to the desired position by choosing the option in the pull down menu. The pose is then automatically applied to the selected performers.
Take ___ counts to move: Enter the number of counts you want to take to get to the selected pose. Then select at the desired count you want the selected pose to take place.
Clear: This will clear the currently selected lower body pose.
M: This will set the currently selected count information to the default duration.

Stand Style: Change the hold style of the performers. This is what the performers do when they are not moving.
Clear: This will clear the currently selected hold style.

Pace: Change the pace style of the selected performers.
Clear: This will clear the currently selected pace style.
Shared Visuals Only: This will filter the pull down menus to show only the options that will apply to all of the performers based on the equipment they are currently carrying.
Clear Visual Changes Counts X-X: This will clear the visuals that are happening over the selected range defined by the Primary (red) anchor and the Secondary (yellow) anchor.

Feedback