Independent sides on props?

This forum is to discuss Tips and Tricks you have learned while using the 3D Java program

Moderator:PywareTechSupport

Post Reply
ranbox56
Posts:18
Joined:Wed Jul 04, 2012 12:12 am
Independent sides on props?

Post by ranbox56 » Thu Jul 12, 2012 11:37 am

How do we assign different graphics to different sides of props?

Pyware
Site Admin
Posts:1155
Joined:Fri Aug 19, 2005 10:38 am
Location:Argyle, TX
Contact:

Re: Independent sides on props?

Post by Pyware » Thu Jul 12, 2012 12:42 pm

To assign separate images to the different sides of the prop you will need to create an image for each side of the box.
imagename.front.jpg
imagename.back.jpg
imagename.left.jpg
imagename.right.jpg
imagename.top.jpg
imagename.bottom.jpg
When you select the prop image select the top image, this will load the top image to be shown in the design view and then it will search for all other sides in the same location of the file that you choose and apply them to the appropriate side of the prop for you.

Use the jpg format if you do not need to have transparency on the prop itself. Use the png format if you want to have some portions of the prop be transparent.
Thank you
Dustin Merrell
Pyware Technical Support
940-240-8536

ranbox56
Posts:18
Joined:Wed Jul 04, 2012 12:12 am

Re: Independent sides on props?

Post by ranbox56 » Thu Jul 12, 2012 12:53 pm

COOL! Thanks!

Post Reply