grid layout

General questions about the use of the Pyware 3D software.

Moderator:PywareTechSupport

Post Reply
Michaelcktan88
Posts:5
Joined:Sat Dec 12, 2015 10:30 pm
grid layout

Post by Michaelcktan88 » Tue Dec 29, 2015 4:52 am

HI,

I have a grid of 100 m by 60 m. The horizontal grid is able to match distance properly at 0m, 5m , 10m, 15m from left to right.

However, the vertical grid from bottom is at 0.25m , 2.75m , 4.25m .. etc

I am using 10steps on 5 m as that is the grid that I have to worked on . 100m by 60 m and lines at 0.5m apart, vertically and horizontally.

the attached floor cover shows a 2.75m for the vertical grid line .

Q1. How do I match the vertical grid so that it is like 0m, 2.5m, 5m ..like the horizontal grid numbering?

Thank you in advance.

Michael
Attachments
Floor Cover 1.JPG

Pyware
Site Admin
Posts:1155
Joined:Fri Aug 19, 2005 10:38 am
Location:Argyle, TX
Contact:

Re: grid layout

Post by Pyware » Wed Dec 30, 2015 3:13 pm

You can click on the marker on the right and then enter the value you want to display in the custom marker field.
Thank you
Dustin Merrell
Pyware Technical Support
940-240-8536

Post Reply