Pyware User Forums

HI,

I have a grid of 100 m by 60 m. The horizontal grid is able to match distance properly at 0m, 5m , 10m, 15m from left to right.

However, the vertical grid from bottom is at 0.25m , 2.75m , 4.25m .. etc

I am using 10steps on 5 m as that is the grid that I have to worked on . 100m by 60 m and lines at 0.5m apart, vertically and horizontally.

the attached floor cover shows a 2.75m for the vertical grid line .

Q1. How do I match the vertical grid so that it is like 0m, 2.5m, 5m ..like the horizontal grid numbering?

Thank you in advance.

Michael

You can click on the marker on the right and then enter the value you want to display in the custom marker field.