Version 10 - Drill Books

Report problems you have been having while using the 3D Java program.

Moderator:PywareTechSupport

Post Reply
Gary McCarty
Posts:52
Joined:Sat Jun 14, 2014 1:35 pm
Version 10 - Drill Books

Post by Gary McCarty » Fri Jun 14, 2019 12:37 pm

In V 10, my Drillbooks are not printing the full field chart, only the smaller, zoomed charts.
Also, on the successive pages (after the cover page) only the instrument label, bot the number is being printed. In other words, all the trumpet books say "Trumpet" nor "Trumpet 1, 2, 3, etc." The cover page is fine.

Neither of these are huge issues for me, but I wanted to see if I'm missing something. I have set all the same criteria as I have in previous versions.

Thanks (and I LOVE the sketch tool!

Gary McCarty
Attachments
Drillbook example.jpg
Drillbook Criteria.jpg

Pyware
Site Admin
Posts:1155
Joined:Fri Aug 19, 2005 10:38 am
Location:Argyle, TX
Contact:

Re: Version 10 - Drill Books

Post by Pyware » Mon Jun 17, 2019 9:56 am

There are 2 options in the drill books. If you choose to print the Notes then you will remove the full chart. If you turn off the Notes option then you will get the full chart on the top.

We had requests for this functionality.
Thank you
Dustin Merrell
Pyware Technical Support
940-240-8536

Gary McCarty
Posts:52
Joined:Sat Jun 14, 2014 1:35 pm

Re: Version 10 - Drill Books

Post by Gary McCarty » Mon Jun 17, 2019 10:50 am

Thank you,

Gary

Post Reply