Reset Sky Camera Pans
Moderator:PywareTechSupport
Is there a way to reset all the sky camera pans?
I thought maybe by selecting the default view button
]
on each camera pan and imputing 0 seconds would reset it but once the animation runs it jumps to that certain angle each time.
Sorry for the large screenshots.
I thought maybe by selecting the default view button
]
on each camera pan and imputing 0 seconds would reset it but once the animation runs it jumps to that certain angle each time.
Sorry for the large screenshots.
Re: Reset Sky Camera Pans
Gabe
Go to the page tab that you set the pan on and then click the reset camera button that you highlighted. Then click the checkbox for When animating use the cameras current location and keep the pan time 0. This will overwrite the current panning to the new location you have set.
Go to the page tab that you set the pan on and then click the reset camera button that you highlighted. Then click the checkbox for When animating use the cameras current location and keep the pan time 0. This will overwrite the current panning to the new location you have set.
Thank you
Dustin Merrell
Pyware Technical Support
940-240-8536
Dustin Merrell
Pyware Technical Support
940-240-8536
Re: Reset Sky Camera Pans
Thanks for the reply!
Not quite working.
It's hard to explain, so I'll just post a video of what I'm talking about.
http://youtu.be/D3rQnLw-TkE
Before I applied any camera pans I was able to "fly" freely during animation. With the camera pan data added If I attempt to fly freely It jumps me to that default view once a new tab is reached.
Not quite working.
It's hard to explain, so I'll just post a video of what I'm talking about.
http://youtu.be/D3rQnLw-TkE
Before I applied any camera pans I was able to "fly" freely during animation. With the camera pan data added If I attempt to fly freely It jumps me to that default view once a new tab is reached.
Re: Reset Sky Camera Pans
I'm not sure if this will work, but select page tab on count 0 and go to cameras and set it to where you want it to be. Then click and drag the red anchor ALLL the way to the end of the drill file. Select the camera and click ok and 0 for the panning.Gabe wrote:Thanks for the reply!
Not quite working.
It's hard to explain, so I'll just post a video of what I'm talking about.
http://youtu.be/D3rQnLw-TkE
Before I applied any camera pans I was able to "fly" freely during animation. With the camera pan data added If I attempt to fly freely It jumps me to that default view once a new tab is reached.
Maybe that's what you already did and I just misread the previous posts but I think that could be something to try in the meantime. I remember having this issue before, but I don't remember what I did to fix it.
Re: Reset Sky Camera Pans
George wrote:
I'm not sure if this will work, but select page tab on count 0 and go to cameras and set it to where you want it to be. Then click and drag the red anchor ALLL the way to the end of the drill file. Select the camera and click ok and 0 for the panning.
Maybe that's what you already did and I just misread the previous posts but I think that could be something to try in the meantime. I remember having this issue before, but I don't remember what I did to fix it.
That did the trick! Exactly what I was looking for. Thanks, George.
Re: Reset Sky Camera Pans
excellent! you're welcome. then that was what I did. I just forgot.Gabe wrote:George wrote:
I'm not sure if this will work, but select page tab on count 0 and go to cameras and set it to where you want it to be. Then click and drag the red anchor ALLL the way to the end of the drill file. Select the camera and click ok and 0 for the panning.
Maybe that's what you already did and I just misread the previous posts but I think that could be something to try in the meantime. I remember having this issue before, but I don't remember what I did to fix it.
That did the trick! Exactly what I was looking for. Thanks, George.
Re: Reset Sky Camera Pans
Also, if you are wanting to watch the animation without camera movements, there is a camera icon on the lower right corner of the Real View if you deselect that it will not use any camera information during playback and then you do not have to remove the camera movements.
Thank you
Dustin Merrell
Pyware Technical Support
940-240-8536
Dustin Merrell
Pyware Technical Support
940-240-8536