pit instruments moving

Report problems you have been having while using the 3D Java program.

Moderator:PywareTechSupport

Post Reply
kurtweimer
Posts:3
Joined:Sun Jul 21, 2013 3:30 pm
pit instruments moving

Post by kurtweimer » Tue Jul 23, 2013 10:45 am

I have pit instruments that are moving from their home location to a different location right after beat 1. I cant seem to figure out how to get them not to move because theres not a way to edit their location other than do it by hand one at a time. They are not associated with a performer.

Pyware
Site Admin
Posts:1155
Joined:Fri Aug 19, 2005 10:38 am
Location:Argyle, TX
Contact:

Re: pit instruments moving

Post by Pyware » Tue Jul 23, 2013 11:30 am

Kurt

Could you email me the file dustin @ pyware .com.
Thank you
Dustin Merrell
Pyware Technical Support
940-240-8536

Jake Euler
Posts:1
Joined:Thu Aug 01, 2013 10:06 am

Re: pit instruments moving

Post by Jake Euler » Thu Aug 01, 2013 10:13 am

I've been having a similar problem. I set everything up on page 1 but as I check the other tabs, some props/pit equimpent are moving or vanishing... Thoughts?

Pyware
Site Admin
Posts:1155
Joined:Fri Aug 19, 2005 10:38 am
Location:Argyle, TX
Contact:

Re: pit instruments moving

Post by Pyware » Thu Aug 01, 2013 12:14 pm

This issue should be resolved in version 7.1.5. If you have created the file in an earlier version the props will actually need to be corrected, but new files created with 7.1.5 should not have this issue.

I would be happy to correct the files if you would like to email them to me at dustin @ pyware.com
Thank you
Dustin Merrell
Pyware Technical Support
940-240-8536

kurtweimer
Posts:3
Joined:Sun Jul 21, 2013 3:30 pm

Re: pit instruments moving

Post by kurtweimer » Wed Aug 14, 2013 7:42 am

Thanks for your help, Dustin!

Post Reply