Setting step size to 8 to 5
Moderator:PywareTechSupport
-
- Posts:2
- Joined:Thu Jan 19, 2017 7:10 am
Is it possible to step size to 8 to 5 for a transition, so that all players do a forward march to their position and then mark time for the remainder of the transition time period?
Re: Setting step size to 8 to 5
Lets say you have 16 counts that you want to march 8 and hold 8.
You would set a tab at 0, 8, 16. Then you can spread your anchors from 0-8 then create your 8 to 5 transition. Then you can simply not do anything from 8-16 and this will be a hold for you.
Then you can add a new page tab after 16 and then design your next set.
You would set a tab at 0, 8, 16. Then you can spread your anchors from 0-8 then create your 8 to 5 transition. Then you can simply not do anything from 8-16 and this will be a hold for you.
Then you can add a new page tab after 16 and then design your next set.
Thank you
Dustin Merrell
Pyware Technical Support
940-240-8536
Dustin Merrell
Pyware Technical Support
940-240-8536
-
- Posts:2
- Joined:Thu Jan 19, 2017 7:10 am
Re: Setting step size to 8 to 5
Thank you for your help. Unfortunately, not all performers are taking the same number of steps in 8 to 5. i.e some will take 4 steps in 8 to 5 and MT 12 counts, some will take 10 steps in 8 to 5 and MT 6 counts. Is there a way to make them march 8 to 5 and then MT once they get to their spot?
Re: Setting step size to 8 to 5
It sounds as if you are doing a Traditional or Military style maneuver.
I accomplish this the best tool would be the Traditional Tool that is available in the Traditional Tools Plug-in.
This plug-in is available in the Professional Edition or can be purchased separately if you have the Basic or Interactive Editions.
http://www.pyware.com/guide/3d/9.0/en/t ... ional-tool
I accomplish this the best tool would be the Traditional Tool that is available in the Traditional Tools Plug-in.
This plug-in is available in the Professional Edition or can be purchased separately if you have the Basic or Interactive Editions.
http://www.pyware.com/guide/3d/9.0/en/t ... ional-tool
Thank you
Dustin Merrell
Pyware Technical Support
940-240-8536
Dustin Merrell
Pyware Technical Support
940-240-8536
-
- Posts:240
- Joined:Sat Apr 22, 2006 3:48 pm
- Location:Parkersburg, WV
- Contact:
Re: Setting step size to 8 to 5
Yes, get the Traditional Toolset. It really, really, really, really, REALLY helps, even for corps/show styled bands.
I enjoy charting military drills. Let me know if you need any assistance with one of them.
Visit G S Bailey Drill Designs
Visit my Youtube page also!
Visit G S Bailey Drill Designs
Visit my Youtube page also!