This would be really helpful.....

We want to here your suggestions on what should be added to make the program better for you.

Moderator:PywareTechSupport

Post Reply
drumthumb
Posts:20
Joined:Mon May 10, 2010 12:43 pm
This would be really helpful.....

Post by drumthumb » Sun Jul 10, 2011 10:54 am

I noticed that when I am locking the audio file to the drill by tapping on the spacebar, no matter how accurate I am, it is always a fraction of a beat off from the beat of the music. To offset this, I have to anticipate the beat by tapping on the spacebar a little earlier - just before the beat.

It would be really helpful if we were able to "slide" the drill (or music track) forward or backward by tiny increments in order to align the music with the drill more accurately.

Pyware
Site Admin
Posts:1155
Joined:Fri Aug 19, 2005 10:38 am
Location:Argyle, TX
Contact:

Re: This would be really helpful.....

Post by Pyware » Mon Jul 11, 2011 10:01 am

What version of 3D are your running?
Thank you
Dustin Merrell
Pyware Technical Support
940-240-8536

drumthumb
Posts:20
Joined:Mon May 10, 2010 12:43 pm

Re: This would be really helpful.....

Post by drumthumb » Thu Jul 28, 2011 11:30 am

I'm running 5.2.3

Pyware
Site Admin
Posts:1155
Joined:Fri Aug 19, 2005 10:38 am
Location:Argyle, TX
Contact:

Re: This would be really helpful.....

Post by Pyware » Thu Jul 28, 2011 11:37 am

Please install version 5.2.5 and then test the audio sync once more.
http://www.pyware.com/updates.html
Thank you
Dustin Merrell
Pyware Technical Support
940-240-8536

phantom75
Posts:6
Joined:Mon May 16, 2011 4:53 pm

Re: This would be really helpful.....

Post by phantom75 » Sun Dec 11, 2011 5:24 am

Hi both

I'm running the latest and greatest version and do have the same problem. I fully agree - a option to edit the clicks would be great. It sometimes happens that one beat of a 600-Beat-Piece is a slight bit out of sync or gets lost due to a missed space bar.

cheers

Martin

Post Reply