Instructions on installing 3D Java on Windows Vista
Moderator:PywareTechSupport
-
- Site Admin
- Posts:139
- Joined:Fri Aug 19, 2005 1:00 pm
- Location:Texas
- Contact:
To install properly on Vista you will need to change a few setting temporarily.
(These settings apply to version 4.1.3 or Less)
1) Change the appearance to Windows Standard.
a. Right Click on the Desktop and choose Personalize.
b. Click on Window Color and Appearance
c. Click on Open classic appearance options
d . Choose the Windows Standard Color Scheme and press apply (Keep this window open or minimized so that you may return your scheme to the Windows Aero once the installation is done.)
2) Change the compatibility mode for the installer.
a. Locate the installer either on the disk or hard drive.
b. Right Click on the installer choose properties.
c. Click on the Compatibility tab
d. Check the box that says Run this program in compatibility mode for Windows XP Service Pack 2
3) Run the program as the administrator
a. Right Click on the installer and choose Run as Administrator
4) Follow the installation prompts and the program should install properly.
5) Once installed change your windows theme back to Windows Aero or Windows Vista Basic.
(These settings apply to version 4.1.3 or Less)
1) Change the appearance to Windows Standard.
a. Right Click on the Desktop and choose Personalize.
b. Click on Window Color and Appearance
c. Click on Open classic appearance options
d . Choose the Windows Standard Color Scheme and press apply (Keep this window open or minimized so that you may return your scheme to the Windows Aero once the installation is done.)
2) Change the compatibility mode for the installer.
a. Locate the installer either on the disk or hard drive.
b. Right Click on the installer choose properties.
c. Click on the Compatibility tab
d. Check the box that says Run this program in compatibility mode for Windows XP Service Pack 2
3) Run the program as the administrator
a. Right Click on the installer and choose Run as Administrator
4) Follow the installation prompts and the program should install properly.
5) Once installed change your windows theme back to Windows Aero or Windows Vista Basic.
Dustin Merrell
Pyware Technical Support
Pyware Technical Support
Installing on Vista
I followed the directions exactly for installing, but I have to validate the program every time I open it. Otherwise it works fine. Running 3D Java v. 3.0.6
Instructions on installing 3D Java on Windows Vista
I have followed these directions 3 times. Each time the computer hangs when it tries to launch the program and validate for the first time. When I cancel out of the program using the task manager, I am then able to open the program but the validation problem persists.
The Version 4.2 is a vista compatible version and does not require to run in compatibility mode of Windows XP. When you have the program open it will change the color scheme to windows Vista Basic. This is a conflict with the Java Virtual machine and the OS. We are currently investigating this. You should have no issues running in this color scheme.
Re: Instructions on installing 3D Java on Windows Vista
Since I'm not in a rush, I thought I'd ask this first before trying something and finding out I should have done it another way. My installer disk is for version 4.0 (or close to it) and I just got a new Vista machine. On my old machine, I upgraded the previous installation to 4.2. Since it seems difficult to install the pre-4.2 versions on Vista, is there a way to install just 4.2? Would the demo work? I vaguely remember using a demo a few years ago that asked for a serial number to activate it. If I didn't imagine that, does it still work that way?
Thanks for the help. Normally I'd just try it and find out, but I have to call on Monday to deactivate 2 of my installations anyway, so I wouldn't make much progress now anyway.
Thanks for the help. Normally I'd just try it and find out, but I have to call on Monday to deactivate 2 of my installations anyway, so I wouldn't make much progress now anyway.
Re: Instructions on installing 3D Java on Windows Vista
Mr. Goodwin
I see that you contacted us via email please let me know if you have any other questions.
I see that you contacted us via email please let me know if you have any other questions.
Re: Instructions on installing 3D Java on Windows Vista
I have 3d java installer version win v.1.0.5 After several unsucessful attempts to install the software, I am asking for help. I tried following the directions in the forum and cannot change the installer to xp service pack 2... I cannot find the option to do that. any suggestions?
Re: Instructions on installing 3D Java on Windows Vista
William
I am sorry but the version 1 of 3D Java will not work on Windows Vista at all. The last operating system that that version will run on is Windows XP.
I am sorry but the version 1 of 3D Java will not work on Windows Vista at all. The last operating system that that version will run on is Windows XP.
-
- Posts:1
- Joined:Thu Jul 16, 2009 1:25 am
Re: Instructions on installing 3D Java on Windows Vista
I am having issues with my pc running the program. I install it and then the pyware box pops up saying its loading the software for further installation (for validation etc) however the box then goes away and the program does not launch. I have repeated the install process multiple times on my machine with varying property set-ups (both in the pyware and windows settings) however it continues not to work. I tried to install it on my girlfriends machine and it fully installed and loaded up (where mine otherwise stops) and went to the validation screen.. Is there something else on my machine possibly keeping pyware from launching? Nothing I have tried works on mine, yet I have gotten it to fully install and load to validation on 3 other machines...
Re: Instructions on installing 3D Java on Windows Vista
Please email dustin@pyware.com or PM me with your serial number and a phone number that I may contact you at so that we may correct this issue for you.
Re: Instructions on installing 3D Java on Windows Vista
when i am installing the java pyware 3d in window 7...the computer is unable to install it n show me this dialog...
"This Application has Unexpectedly Quit: Invocation of this Java Application has caused an InvocationTargetException. This application will now exit. (LAX)"
how to resolve this problem....?
urgent!!!!
thx^^
"This Application has Unexpectedly Quit: Invocation of this Java Application has caused an InvocationTargetException. This application will now exit. (LAX)"
how to resolve this problem....?
urgent!!!!
thx^^
Re: Instructions on installing 3D Java on Windows Vista
Please email dustin@pyware.com or PM me with your serial number and a phone number that I may contact you at so that we may correct this issue for you.